Sensepoint XCD RTD toxic and oxygen gas detection transmitters

Sensepoint XCD RTD (Remote Toxic Detector) has been specifically designed for use with the Honeywell Analytics range of Sensepoint toxic and oxygen sensors. This configuration is ideal for a wide range of toxic and oxygen gas detection applications. The sensor can be mounted up to 30 metres (100 feet) away from the transmitter in areas that are difficult to access. The transmitter can be mounted at a suitable location away from this area where it is easy to access, view its display and interact with via the user interface.

The sensors can be directly mounted to the M25 entry at the bottom of the transmitter, or remotely mounted to suitable junction boxes or duct mounting assemblies.

The transmitters tri-colour backlit LCD clearly indicates status at a glance, even from a distance. A steady green backlight indicates normal operation, flashing yellow indicates fault and flashing red indicates an alarm.

Outputs include 2 programmable alarm relays, 1 programmable fault relay as well as 4-20mA output (sink or source selectable).The range, relay operation, alarm set points and electronic tag number of the detector can be adjusted using the transmitters LCD and the non-intrusive magnetic switches. Outputs are automatically inhibited during adjustment thereby reducing the risk of false alarm at the control panel during maintenance.

Sensepoint XCD RTD from Honeywell Analytics (manufacturers of toxic and flammable gas detection systems under the Sieger and Zareba brands) can be used stand alone or with a choice of controllers such as the Honeywell Zareba Unipoint, or operated from a customerĀ“s own existing system due to the use of industry standard outputs.

  • Features:
    • Clear and informative display - Tri-colour backlight on LCD display. Instantly and clearly visible from a distance. Helps to clarify operation status in adverse situations
    • Multiple signal outputs - 4 to 20mA standard. Programmable alarm and fault relays
    • Compatible with Honeywell Sensepoint oxygen and toxic gas sensors
    • Non-intrusive operation - Easy routine maintenance. No need to open the transmitter. Faster planned maintenance. Greater operator confidence
    • Housing material options - Aluminium alloy or Stainless Steel 316
    • Easy to install - Simple plug-in sensors. Integral plate for wall mount. Separate kit for vertical/horizontal pipe mount. On board relays allow for local alarms. 3 wire operation, source or sink
    • Sensor can be mounted up to 30 metres (100 feet) from transmitter
  • Sensepoint XCD RTD supplied complete with:
    • XCD RTD transmitter
    • Wall mounting plate
    • Magnetic wand and Allen key
    • Quick start guide and user manual CD
  • Optional accessories:
    • SPXCDWPXCD Weather proof
    • S3KCAL Calibration cap
    • SPXCDCC Collecting cone for use with lighter than air gases
    • SPXCDDMK Duct mounting kit
    • SPXCDMTBR Pipe Mounting bracket (inc. fixings and hex wrench set)
    • 00780-A-0100 Honeywell Junction Box- Bartec OTB122
Suitable gas sensors for use with the XCD RTD can be selected from the Honeywell Sensepoint range.

The Sensepoint XCD RFD (Remote Flammable Detector) range is also available to compliment the XCD RTD.

Honeywell Sensepoint XCD RTD remote flammable gas detection transmitter datasheet Sensepoint XCD RTD
Honeywell Sensepoint XCD RTD remote flammable gas detection transmitter user manual Sensepoint XCD RTD
user manual
Buy the Sensepoint XCD RTD now, Tel: 01279 307100
3563-001 Sensepoint XCD RTD ATEX/IECEX & AP approved transmitter (SPXCDALMTX4) alum. alloy POA
3563-002 Sensepoint XCD RTD ATEX/IECEX & AP approved transmitter (SPXCDASMTX4) 316 stainless steel POA
Fill out my online form.